Product Description

The Hoshizaki HNC-210BA-L-SLH is the largest case in Hoshizaki's countertop sushi display line, running 82.7 inches wide with 3.07 cubic feet of refrigerated display and a left-side condenser. It is built for high-volume sushi bars and prepared-food counters that need close to seven feet of merchandised frontage from a single self-contained cabinet.

Seven Feet of Display, One Piece of Glass

The curved front glass spans the entire 82.7-inch width without a mullion. On a case this long that matters more than on the shorter models: every vertical joint would sit squarely in a customer's field of view. The cabinet stays 13.6 inches deep and 11 inches tall, so despite the length it does not overwhelm a standard counter or block sight lines to staff behind it.

Even Lighting Across the Full Length

LED lighting runs the width of the interior. Across nearly seven feet, even illumination is the difference between a display that reads as consistent and one where the middle looks dull. The included food plates are formed with radius grooves so items sit at a repeatable angle down the whole line.

Loading From Behind, Cooling From the Left

Half glass sliding doors on the operator side let staff replenish without leaning across the display. The condenser section occupies the left end of the cabinet, drawing and rejecting air on that side, so leave clearance there and keep it away from adjacent cook lines. The system is self-contained on R-600a natural refrigerant and needs only a standard 115V outlet at 1.1 amps.

Specifications

Model HNC-210BA-L-SLH
Type Countertop refrigerated display case, self-contained
Condenser location Left side
Net capacity 3.07 cu ft
Exterior dimensions 82.7" W x 13.6" D x 11" H
Doors Half glass sliding doors, curved full-length front glass
Lighting LED
Electrical 115V / 60Hz / 1 phase, 1.1 amps
Power consumption 130 watts
Plug NEMA 5-15P, 6.5 ft cord
Refrigerant R-600a
Certifications NSF
Shipping weight 145 lbs

Warranty

Two years parts on the air-cooled condenser compressor, and one year parts and labor on the entire machine.

Customers also bought