Hoshizaki CC95-S stainless steel three-section back bar bottle cooler with slide top doors

Product Description

The Hoshizaki CC95-S is the largest bottle cooler in the CC line built in a stainless steel cabinet — three sections, slide top doors, 27.98 cubic feet holding approximately 1,408 twelve-ounce cans or 672 twenty-ounce bottles.

Full-Width Cold Staging

At nearly 1,400 cans this cooler is specified where an entire service is staged cold in advance: stadium concourse bars, clubs, and high-volume service bars that cannot afford a restock trip mid-shift. Three separate wells across 95-1/2 inches let staff work fixed brand positions rather than searching one long trough.

Stainless Construction

The lid surface of a bottle cooler is used as a landing area all night and wiped down constantly, and the wells themselves collect spilled product every shift. Stainless throughout is what tolerates that plus nightly sanitizer without degrading, and it finishes the cabinet properly when the cooler sits in an exposed bar line.

Slide Top Doors and R290 Refrigeration

Chilled air is denser than room air, so it settles into the wells and stays there when a lid slides open instead of spilling out at floor level as it does from an upright door. The unit is charged with R290 natural refrigerant and draws 6.5 amps on a standard 115-volt circuit.

Specifications

Model CC95-S
Type Three-section back bar bottle cooler
Doors Slide top
Exterior Finish Stainless steel
Storage Capacity 27.98 cu ft
Can Capacity Approximately 1,408 (12 oz)
Bottle Capacity Approximately 672 (20 oz)
Exterior Dimensions 95-1/2"W x 29"D x 36-7/8"H
Shipping Weight 355 lbs
Crate Dimensions 98-1/2"L x 31-1/4"D x 39"H
Electrical 115V / 60 Hz / 1 Phase
Amperage 6.5 A
Plug NEMA 5-15P
Power Cord 8 ft
Refrigerant R290
Certifications ETL Safety Listed (US & C), ETL Sanitation Listed

Warranty

Five years on the compressor and three years parts and labor.

Customers also bought