Hoshizaki CC80-S stainless steel three-section back bar bottle cooler with slide top doors

Product Description

The Hoshizaki CC80-S is a three-section back bar bottle cooler with slide top doors in a stainless steel cabinet, holding 24.67 cubic feet — approximately 1,150 twelve-ounce cans or 547 twenty-ounce bottles.

Side-Mount Refrigeration with Left-to-Right Airflow

The refrigeration system mounts at the side of the cabinet and moves air across the wells from left to right rather than up from a base deck. That keeps the condenser out of the floor-level spill and debris zone behind a bar — the usual reason bar refrigeration fails early — and it means product at the far end of an 80-inch cooler holds the same temperature as product next to the compressor.

Three Wells, Stainless Throughout

Three separate sections let a bar assign product by brand or type so staff reach into a fixed position instead of digging through a single long well. The stainless cabinet takes the nightly sanitizer and the constant use of the lid surface as a landing area without degrading.

R290 Refrigeration

The cooler is charged with R290, a natural hydrocarbon refrigerant with very low global warming potential, and draws 6.2 amps on a standard 115-volt circuit through a NEMA 5-15 plug and 8-foot cord.

Specifications

Model CC80-S
Type Three-section back bar bottle cooler
Doors Slide top
Exterior Finish Stainless steel
Storage Capacity 24.67 cu ft
Can Capacity Approximately 1,150 (12 oz)
Bottle Capacity Approximately 547 (20 oz)
Exterior Dimensions 80"W x 29"D x 36-7/8"H
Shipping Weight 315 lbs
Crate Dimensions 82-1/2"L x 31-1/4"D x 39"H
Electrical 115V / 60 Hz / 1 Phase
Amperage 6.2 A
Plug NEMA 5-15P
Power Cord 8 ft
Refrigerant R290
Certifications ETL Safety Listed (US & C), ETL Sanitation Listed

Warranty

Five years on the compressor and three years parts and labor.

Customers also bought