Hoshizaki CC65-S stainless steel two-section back bar bottle cooler with slide top doors

Product Description

The Hoshizaki CC65-S is a two-section back bar bottle cooler with slide top doors in a stainless steel cabinet, holding 19.6 cubic feet — approximately 890 twelve-ounce cans or 360 twenty-ounce bottles.

Stainless Where the Cooler Is Worked

A bottle cooler takes more abuse than most bar refrigeration: the lid surface is used as a landing area, it is wiped down constantly, and the well itself sees spilled product every shift. Stainless construction is what survives that indefinitely, and it also finishes the cabinet properly when the cooler sits in an open bar line rather than behind millwork.

Slide Top Doors and Well Storage

Sliding lids let staff reach straight down into product in a single motion, and because cold air sinks it stays in the well rather than pouring out the way it does from an upright door. Capacity is 19.6 cubic feet, a meaningful step up from the 14.4 cubic feet of the CC50-S in the same operating format.

R290 Refrigeration

The unit is charged with R290 natural refrigerant and draws 6.2 amps on a standard 115-volt circuit through a NEMA 5-15 plug on an 8-foot cord.

Specifications

Model CC65-S
Type Two-section back bar bottle cooler
Doors Slide top
Exterior Finish Stainless steel
Storage Capacity 19.6 cu ft
Can Capacity Approximately 890 (12 oz)
Bottle Capacity Approximately 360 (20 oz)
Exterior Dimensions 69-1/2"W x 29"D x 36-7/8"H
Shipping Weight 275 lbs
Crate Dimensions 68-1/2"L x 31-1/4"D x 39"H
Electrical 115V / 60 Hz / 1 Phase
Amperage 6.2 A
Plug NEMA 5-15P
Power Cord 8 ft
Refrigerant R290
Certifications ETL Safety Listed (US & C), ETL Sanitation Listed

Warranty

Five years on the compressor and three years parts and labor.

Customers also bought