Product Description

The Ampto PZA-6US is a single deck electric pizza oven with a 41.57 x 26 inch refractory brick deck, holding 6 pizzas of 12 inches per load at up to 842 F. It runs on 220V three phase power and is made in Italy.

Independent Top and Bottom Heat with a Brick Deck

Each deck has independent top and bottom heat control, so the floor can be set hotter or cooler than the crown to balance a crisp base against topping color. The baking surface is removable refractory brick, the deck interior is aluminized steel, and mineral wool insulation surrounds the chamber. Armored heating elements, halogen lighting, a baking timer and an independent temperature safety device are standard.

A Wider Deck for 18 Inch Pies

The PZA-6US uses the wider 41.57 x 26 inch deck, which fits six 12 inch pizzas, two 18 inch pizzas, or two 18 x 26 inch trays at once. That makes it the single deck choice for operations running large pies or sheet trays, where the 28.35 inch square deck of the PZA-4US holds only one 18 inch pizza. The PZA-12US stacks two of these decks in the same 52 inch width.

23 Amps on a Three Phase Circuit

The standard PZA-6US runs on 220V three phase power and draws 23 amps, with Ampto recommending AWG 4x10 wire and a NEMA 15-30P plug. Average consumption is listed at 4.1 kWh. The oven ships wired with no plug attached, and a single phase version is available as an option, drawing 39 amps with a NEMA 6-50P plug recommendation. A painted steel stand is included and ships unassembled; casters, a top front steam collector for direct ventilation, and a stacking kit are optional.

Specifications

Model PZA-6US
Series PZA
Type Electric pizza deck oven
Decks 1
Deck Interior Dimensions 41.57 x 26 in. (W x D)
12 Inch Pizza Capacity 6 per deck
18 Inch Pizza Capacity 2 per deck
18 x 26 Inch Tray Capacity 2 per deck
Max Temperature 842 F (450 C)
Baking Surface Refractory brick, removable
Door Stainless steel, bottom hinged, tempered glass
Exterior Dimensions 52 in. W x 43.5 in. D x 54 in. H (with stand)
Net Weight 271 lbs
Shipping Weight 320 lbs
Electrical 220V, 60/50 Hz, 3 phase (single phase version optional)
Average Consumption 4.1 kWh
Amperage 23 A (3 phase); 39 A (optional single phase)
Recommended Wire AWG 4x10 (3 phase)
Plug Wired, no plug supplied; NEMA 15-30P recommended (3 phase), NEMA 6-50P (single phase)
Construction Stainless steel front, painted steel sides and back
Stand Painted steel, included, ships unassembled
Certifications cETLus, CE
Country of Origin Italy

Warranty

Ampto covers the PZA series with a 1-year parts and labor warranty, valid in the US only. The warranty must be activated through Ampto's warranty registration.

Customers also bought