Product Description

The Ampto PZA-4US is a single deck electric pizza oven with a 28.35 x 28.35 inch refractory brick deck, holding 4 pizzas of 12 inches per load at up to 842 F. It runs on 220V three phase power and is made in Italy.

Independent Top and Bottom Heat with a Brick Deck

Each deck has independent top and bottom heat control, so the floor can be set hotter or cooler than the crown to balance a crisp base against topping color. The baking surface is removable refractory brick, the deck interior is aluminized steel, and mineral wool insulation surrounds the chamber. Armored heating elements, halogen lighting, a baking timer and an independent temperature safety device are standard.

Smallest Footprint in the PZA Line

At 39 inches wide, the PZA-4US shares its square 28.35 inch deck with the two-deck PZA-8US, while the PZA-6US and PZA-12US move to a wider 41.57 x 26 inch deck. The square deck holds four 12 inch pizzas or a single 18 inch pie, which suits shops that bake mostly small and medium rounds. If volume grows, the PZA-8US doubles the same deck in the same width.

17 Amps on a Three Phase Circuit

The standard PZA-4US runs on 220V three phase power and draws 17 amps, with Ampto recommending AWG 4x10 wire and a NEMA 15-30P plug. Average consumption is listed at 3 kWh. The oven ships wired with no plug attached, and a single phase version is available as an option, drawing 29 amps with a NEMA 6-30P plug recommendation. A painted steel stand is included and ships unassembled; casters, a top front steam collector for direct ventilation, and a stacking kit are optional.

Specifications

Model PZA-4US
Series PZA
Type Electric pizza deck oven
Decks 1
Deck Interior Dimensions 28.35 x 28.35 in. (W x D)
12 Inch Pizza Capacity 4 per deck
18 Inch Pizza Capacity 1 per deck
18 x 26 Inch Tray Capacity 1 per deck
Max Temperature 842 F (450 C)
Baking Surface Refractory brick, removable
Door Stainless steel, bottom hinged, tempered glass
Exterior Dimensions 39 in. W x 45.75 in. D x 54 in. H (with stand)
Net Weight 232 lbs
Shipping Weight 278 lbs
Electrical 220V, 60/50 Hz, 3 phase (single phase version optional)
Average Consumption 3 kWh
Amperage 17 A (3 phase); 29 A (optional single phase)
Recommended Wire AWG 4x10 (3 phase)
Plug Wired, no plug supplied; NEMA 15-30P recommended (3 phase), NEMA 6-30P (single phase)
Construction Stainless steel front, painted steel sides and back
Stand Painted steel, included, ships unassembled
Certifications cETLus, CE
Country of Origin Italy

Warranty

Ampto covers the PZA series with a 1-year parts and labor warranty, valid in the US only. The warranty must be activated through Ampto's warranty registration.

Customers also bought